You can reach us at +358 9 7518 0500
You can reach us at 09 7518 0500
Our product range offers a wide selection of handles and locks from different manufacturers. Our selection comprises high-quality products from several European manufacturers, both as standard products and customised solutions.
Black, a cover plate provided for mounting points. Hole spacing 134mm.
A steel-frame hard rubber handle, two lengths.
Hole spacing 150mm.
A steel-frame hard rubber handle, hole spacing 163/213mm.
A steel-frame hard rubber handle, hole spacing 327/375mm.
Max. load as handle 500kg and as step 400kg. Hole spacing 140/20mm.
End piece and centre support must be ordered separately. For 30mm pipe, pipe not included.
For 35mm pipe.
A fully-recessed grab handle, large enough to receive a gloved hand. The unit is completely corrosionresistant and shaped to allow run-off of water (spray, etc.). It is suitable for large commercial vehicles and trailers.
A 131.5mm black ABS plastic flush fit, screw fix recessed panel handle. Supplied with black pressed steel clamp plate, fixing screws and neoprene gasket.
129,5mm chrome plated locking, keyed alike lever handle with 44.5mm hole centres.
129.5mm chrome plated, non-locking lever handle with 44.5mm hole centres.
Chromed handle, nonlocking.
A star-shaped spindle opening, which means that the handle position can be set at every 45°.
Inside Squeeze Release was specifically designed for off-highway vehicle applications including agricultural and construction equipment that require a remote inside release. The robust construction is incorporated into either 25 or 32mm round tubing for support for the opening and closing functions of the door and provides for greater ease of operation.
A locking (keyed alike) 101mm, chrome plated tee handle. Supplied with a key (339991).
180mm locking (keyed alike) black glass reinforced polyester push button handle with a light etch finish. Featuring a zinc alloy die-cast cam and hidden fixing via threaded brass inserts.
Two lock options available: one with key MC01 and the other with an arbitrary key.
Recessed lockable external handle.
Round Paddle Handle was designed for use on personnel and compartment doors for light to medium duty on or off-highway applications.
Flush mounted paddle handle. Black. Plastic. Four keys.
Mounting hole about 135x85mm.
Handle made of black plastic, metal parts of steel painted black. Includes handle and striker plate.
Lock / puller / arm rest, long model. Includes handle, striker plate and protective plastic.
Lock / puller / arm rest. Long or short clamper lock, colour black. Includes handle, striker plate and protective plastic.
Includes handle and striker plate. Clamper lock.
Fits locks 300640, 300650, 300660, 300670, 300700, 300705, 300720, and 300730.
M12/1mm thread, thread length 18mm, pin diameter 10mm.
M12/1mm thread.
For locks 300640, 300650, 300700, and 300705.
For intermediate rod 380220.
For locks 300640, 300650, 300700, and 300705. Selection depending on the handedness of the lock.
Zinc catch. Catch 2mm from the lock’s inside surface.
Can be safety-locked. The figure shows a right-handed one.
Suitable either on the right or the left.
Includes rods and guides (2pcs). Rod movement range approx. 23mm/side.
Lockable, suitable for door strengths 15-22mm.
For lock 300760. Safety locking possible by lifting the handle upward. Puller included.
Plastic-coated handle, nylon catch.
The figure shows a right-handed one.
A right hand zinc plated pressed steel slam lock with handle, with a iron tongue.
Lock with steel catch.
Catch made of bent RTS plate. Includes lock cylinder and seal.
No lock cylinder.
Release from the inside.
Includes lock cylinder and seal. Max. door thickness approx. 30mm. 2-direction design.
Incl. two keys.
With an articulated T-handle. Chrome-plated handle. Includes a lock cylinder, two yellow-passivated rods, and two guides.
With an articulated T-handle. Chrome-plated handle. Locking cylinder included.
Articulated T-handle. Chrome-plated handle. Locking cylinder included. Adjustable catch.
With an articulated T-handle. Chrome-plated handle. No lock cylinder or rods.
With an articulated T-handle. Chrome-plated handle. Locking cylinder with plastic cover.
The striker har an adjustment mechanism for eliminating vibrations and noises.
With key locking. Catch movement 180°. Key included.
Black powdercoating. Catch movement 90°.
Water tight and completely adjustable lock cylinder. Spindle diameter 7mm.
Used for example in protective covers, vehicle bonnets and sliding doors.
Inside hole 12.5mm.
Suitable for 5-10mm rectangular holes.
Suitable for 6-9mm rectangular holes. Equipped with a hanging loop.
Spindle Ø 9,9mm, material zinc plated steel.
Striker for product 810120. The figure shows a right-handed one.
For 16mm rod. Seal available separately.
For 27mm pipe.
Pipe for rod lock 27mm.
Complete rod lock set for 27mm pipe.
Lock beak set for 27mm pipe including ferrules (2 x 160mm and 2 x 35mm), beaks and strikers.
Mount Slam Latch Set with Inside Safety Release.
Rubber ferrule / bumper rubber for lock beak set.
Suitable for strikers 380900 (right) and 380910 (left).
Fits rod lock beak 380920.
For 15mm rod.
For 16mm rod.
Supplied with 2 keys. Suitable for Ulises, LIR and Atlas locks.
Recess depth 29mm.
Manual handle coated with black ABS. Rod mounting by riveting or welding. Can be equipped with a lock cylinder.
Includes an adjustable striker. Inside opening mechanism as an accessory.
An accessory to the surface-mounted Boreas lock. Makes it possible to open the door on the inside, even if the lock is locked from the outside.
Striker included.
Locking device 300020 available separately.
Key for outer handle.
Black.
Designed to use with handles and latches that makes it easier to hold and operate.
Product is sold in batches of MinSalesLot SellUnit. The amount you enter will be rounded to a sales batch of .