KIWIGRIP NON-SKID COATING
KIWIGRIP ROLLER 4” AND HANDLE
KIWIGRIP ROLLER 9”
Kiwigrip
Kiwigrip
Kiwigrip varit

KIWIGRIP NON-SKID COATING

Show products Ask for more information

Kiwigrip is an outstanding non-skid coating intended particularly for boats. The product is easy to spread with a roller specially designed for that purpose, so it is also suitable for do-it-yourself use. By varying the application technique, you can adjust the texture to obtain a more aggressive surface for demanding use or a more rolled but still safe surface suitable for pleasure boats.

A homogeneous composition means that the Kiwigrip coating doesn’t release any fillers. The coating retains its non-skid properties for a very long time, in contrast to products that contain, for example, sand as a filler material

It is very resistant UV radiation, easy to keep clean and does not contain any hazardous substances.

One litre will cover an area of approximately 2 m2 depending on the site and the underlying surface. Suitable for wood, fibreglass, epoxy, concrete and metal surfaces (requires correct preparation).

Colours:
Kiwigrip products contain a UV stabiliser, which ensures consistent and long-lasting colours. Available in several different colours. Note: RAL codes are approximate.

 

Vinkki! Avaa -ikonista tuotteen lisätiedot ja lisää halutessasi ostoskoriin.

Related products

Vinkki! Avaa -ikonista tuotteen lisätiedot ja lisää halutessasi ostoskoriin.

SURFACE PREPARATION:
- The surfaces must be sealed and free of oil and dust
- Sand the surfaces lightly, and then remove the resulting dust
- Use masking tape to outline the edges of the area being coated

APPLICATION:
- KiwiGrip coating is slightly paste-like when wet. Apply a continuous, even layer to an area of approximately ¼ - ½ m² at a time. Use the roller 
   to spread the coating immediately after application. If you want a rougher surface texture, roll the surface lightly again after a short drying
   period.            
- Carefully remove the masking tape while the coating is still wet
- Avoid working in direct sunlight

KUIVUMINEN:
- 10 oC /60% working time 35 min        drying time 12 h
- 20 oC /70% working time 25 min        drying time 10 h
- 30 oC /85 % working time 15 min        drying time 8 h
- The coating achieves its final strength in about two weeks.

CLEANING:
- Clean tools and remove stains by washing immediately with clean, fresh water